Table of Contents
Advertisement
Owners manual
8.2 Dynamic Backrest Installation
Follow these instructions to replace a standard back width a dynamic back:
1.
Remove the armrests and the wheels;
2.
Remove the backrest ;
Unscrew bolt A to remove the back posts;
3.
Remove the armrest hardware B, screw C and screw H on the small tube;
4.
Remove bolt D;
5.
Using a flat punch remove sleeves E to release the plate. ;
6.
Figure 29: Dynamic Backrest Installation
E
Figure 30: Dynamic Backrest Installation
25
ENGLISH
Flat Punch
Revision 5
January 2016
Advertisement
Table of Contents
