Table of Contents
Advertisement
Owners manual
4 Configuration :
4.1 Necessary tools :
In order to configure the Spiral tilt in space wheelchair, metric tooling is required with the
exception of contraindication listed in the documentation. These metric tools include the
following items:
Hex key 3, 4, 5 et 6 mm
4.2 Seat depth :
Key 8, 10, 13, 17 mm
The seat depth is adjustable from 12"
anchors provide a seating depth of 10
Modifing the seat depth:
1.
Removing the seat pan :
a. First remove the seat
pan by unscrewing
the(A) and (B) bolts;
b. Remove the U-clip
(located under the seat
pan opposite of the
bolts (B));
c. Release the bolts (C) to
adjust the seat pan in
depth;
Modification
Any modification made to the Spiral tilt in space wheelchair must be done by a
professional. Failure to comply with this notice may have serious consequences
for the safety of users and individuals in contact with the wheelchair and
discharge Physipro of all responsabilities.
to
"
or
11
Warning!
To change the seat depth, please refer to the seat depth adjustment table.
Incorrect adjustment of the seat depth may cause this chair to become unstable,
reduce the effectiveness of the brakes, and result in serious injury. For more
details, you're invited to contact Physipro.
"
16
(30,5 to 40,6 cm) for all Spiral chairs. Special backrest
"
.
(25,4 or 27,9 cm)
Figure 21 : Adjusting the seat pan
23
23
ENGLISH
Révision 0
juillet 18
Revision 1
July 2018
Advertisement
Table of Contents
