Panasonic KX-NCP500 Feature Manual page 42

3.1.5 Call Hold
Flashing the
hookswitch
Mode 3 Hold Feature No.
Going on-hook
Flashing the
hookswitch
Mode 4 Hold Feature No.
Going on-hook
*1
These operations must be performed when the held call is intended to be retrieved from another extension using the holding
extension number.
If one of the following occurs frequently with an SLT, choose "Mode 2", "Mode 3", or "Mode 4":
a.
When an SLT user answers a call, a reorder tone is heard or no one is heard on the other end.
b.
When an SLT user goes off-hook, a reorder tone is heard instead of a dial tone.
If a call is not terminated after going on-hook, the above cases occur. To avoid these problems, choose
"Mode 2", "Mode 3", or "Mode 4". Every call will be terminated unless the Hold feature number is entered
after flashing the hookswitch in Mode 2, Mode 3, and Mode 4.
•
Hold Alarm tone pattern has a default. (® 21.2 Tones/Ring Tones)
PC Programming Manual References
4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
→ Recall—Hold Recall
→ Recall—Disconnect after Recall
4.9 [2-6-1] Numbering Plan—Main—Features
→ Call Hold / Call Hold Retrieve
→ Call Hold Retrieve : Specified with a Holding Extension Number
→ Hold Retrieve : Specified with a Held CO Line Number
4.18 [2-9] System Options
→Option 1— PT Operation—Automatic Hold by ICM / CO / ICD Group key
→Option 1— PT Operation—Hold Key Mode
→Option 5— SLT—SLT Hold Mode
PT Programming Manual References
[200] Hold Recall Time
Operating Manual References
1.3.6 Call Hold
42 Feature Manual
Hold (to be Retrieved from
Another Extension)
Flashing the hookswitch
+ Hold Feature No.
+ Hold Feature No.
Going on-hook
Flashing the hookswitch
+ Hold Feature No.
+ Hold Feature No.
Going on-hook
Hold
Transfer to CO
*1
Flashing the
+ hookswitch
+ Hold Feature No.
+ CO Line Access
Flashing the
+ hookswitch
+ Hold Feature No.
+ CO Line Access
Transfer to
Line Extension
Flashing the
hookswitch
+ +
Extension No.
+
No.
Flashing the
hookswitch
+ +
Hold Feature No.
+ +
Extension No.
No.
Document Version 2013-05