Panasonic KX-NCP500 Feature Manual page 299

Item
Date & Time Set
System Password
for Installer
Manager Extension
and Operator
Flexible
Numbering
—Feature
Flexible
Numbering
—Extension
Flexible
Numbering
—Operator
Flexible
Numbering—CO
Access
DTMF/Pulse
Dialing
*1
Document Version 2013-05
Parameter
Year/Month/Date/Hour/
Minute
4–10 characters
Extension Number
1.
Pattern 1
(with )
2.
Pattern 2
(without )
KX-NCP500/
KX-NCP1000/
KX-TDE100/
KX-TDE200:
From 101/from 201
KX-TDE600:
From 1001/from 2001
0/9
0/1/9
Pulse/DTMF
Description
The date and time set on the PC can be used by default.
Enter the system password for installer (®
13.1.3 Password Security).
Assign an extension as a manager extension (®
11.1.1 Manager Features) and an extension as a PBX
operator (® 12.1.5 Operator Features).
Select whether or not the prefix " " must be entered
before dialing feature numbers.
[Example] Call Pickup feature number
Pattern 1 (with ): 41
Pattern 2 (without ): 41
Note that certain feature numbers (Line Access
numbers, Operator Call, etc.) never need this prefix.
For a list of the default flexible numbers, refer to the
[Flexible Numbering Table (available while a dial tone
is heard)] (® 6.1.4 Flexible Numbering/Fixed
Numbering).
Determines the number from which default extension
numbers begin.
The feature number for Operator Call can be selected.
The feature number for Idle Line Access can be
selected.
Determines whether DTMF or pulse dialing is used on
analog CO lines by default.
14.1.2 Quick Setup
Feature Manual 299