Panasonic KX-NCP500 Feature Manual page 398

21.3 Supported Management Information Base (MIB) Table
Object ID
2.1.16 ifOutOctets
2.1.17 ifOutUcastPkts
2.1.18 ifOutNUcastPkts
2.1.21 ifOutQLen
2.1.22 ifSpecific
IP Group (1.3.6.1.2.1.4)
Object ID
1 ipForwarding
2 ipDefaultTTL
3 ipInReceives
4 ipnHdrErrors
5 ipInAddrError
7 ipInUnknownProtos
8 ipInDiscards
9 ipInDelivers
10 ipOutRequests
13 ipReasmTimeout
14 ipReasmReqds
15 ipReasmOKs
16 ipReasmFails
17 ipFragOKs
18 ipFragFails
19 ipFragCreates
398 Feature Manual
Item Description
The number of Octets transmitted.
The number of Unicast Packets which are received from
upper protocol.
The number of Non Unicast Packets which are received
from upper protocol.
The length of the output packet queue (in packets).
Relevant MIB object identifier.
Item Description
The value which indicates operation availability as a router
(whether Datagram is transferred or not).
Default value for IP Packet TTL (Time to Live).
The total number of Packets received (including packet
received in error).
The number of Packets discarded due to errors in their
header.
The number of Packets discarded because IP Address of
the destination was invalid.
The number of Packets discarded because the protocol
was unknown/unsupported.
The number of incoming Packets discarded because of an
insufficient reception buffer.
The total number of Packets received (including ICMP)
normally.
The total number of IP Packets (ICMP) which are tried to
be transmitted (relay Packet is not included).
The maximum number of seconds required in the buffer to
rebuild a fragmented Packet.
The number of Packets that required rebuilding from a
fragmented state.
The number of Packets that were rebuilt correctly from a
fragmented state.
The number of Packets that could not be rebuilt correctly
from a fragmented state.
The number of Packets that were fragmented correctly.
The number of Packets that could not be fragmented
correctly.
The number of IP datagrams created due to fragmentation.
Document Version 2013-05