Panasonic KX-NCP500 Feature Manual page 292

Pure ip-pbx
Hide thumbs Also See for KX-NCP500:
Table of Contents

Advertisement

13.1.31 PS—Ring Group
Calls can be distributed to member extensions using
different methods
The CS is less likely to be busy; ringing all member PSs
uses only one CS channel
Members can log-in, log-out, and use Wrap-up time, ICD
Group button
Both PTs and PSs can belong to the same group
Each member can belong to more than one group
Calls can wait in a queue if they cannot be answered
[Example of CS Channels Used for PS Ring Group Calls and ICD Group Calls]
PS Ring Group
Member
Incoming call
PS Ring Group
Member
Explanation:
The PS ring group has six members which are in range of two different CSs. When a call arrives, each CS
uses one channel to ring all member PSs within its range.
The ICD group has one proprietary telephone (PT) member, as well as six PS members which are in range of
two different CSs. When a call arrives, each CS uses three channels to ring each of the member PSs within
its range.
Conditions
A maximum of 32 PS ring groups can be programmed.
Each member of a PS ring group must be a PS, but each member does not need to be in range of the
same CS. When a call is directed to a PS ring group, all CSs connected to the PBX will try to ring members
of the group.
292
Feature Manual
Features
PS Ring Group
Member
PS Ring Group
Member
PS Ring Group
PS Ring Group
Member
PS Ring Group
Member
PS Ring Group
ICD Group
Member
ICD Group
Member
ICD Group
ICD Group
Member
ICD Group
Member
Document Version 2013-05
ICD Group
ICD Group
Member
Incoming call
ICD Group
Member
ICD Group
Member

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-ncp1000Kx-tde100Kx-tde600Kx-tde200

Table of Contents