Panasonic KX-NCP500 Feature Manual page 118

6.1.3 Flexible Buttons
Button
External Feature Access (EFA)
Call Park
Call Park (Automatic Park Zone)
Call Log
Log-in/Log-out
*1
Hurry-up
Wrap-up
*1
System Alarm
Time Service
*1
Answer
Release
Toll Restriction
Calling Line Identification
Restriction (CLIR)
*1
Connected Line Identification
Restriction (COLR)
Headset
Time Service Switching Mode
(Automatic/Manual)
Two-way Record
Two-way Transfer
118 Feature Manual
Used to send a flash/recall signal to the telephone company or host
PBX to access external features. (® 5.1.1 EFA (External Feature
Access))
Used to park or retrieve a call in a preset PBX parking zone. (®
3.1.8 Call Park)
Used to park a call in an idle PBX parking zone automatically. (®
3.1.8 Call Park)
Used to show a log of received calls. (® 3.1.6 Call Log, Incoming)
Used to switch between Log-in and Log-out status. (® 9.1.3 ICD
Group Features—Log-in/Log-out)
Used to redirect the longest waiting call in the queue of an ICD group
to the overflow destination. (® 9.1.6 ICD Group
Features—Queuing)
Used to switch between Wrap-up/Not Ready and Ready modes.
(® 9.1.3 ICD Group Features—Log-in/Log-out)
Used to display a PBX error. (® 10.1.4 Local Alarm Information)
Used to change or display the current time mode (day/lunch/break/
night). (® 17.1.5 Time Service)
Used to answer an incoming call. (® 8.1.3 Headset Operation)
Used to disconnect the line during or after a conversation, or to
complete a Call Transfer. (® 8.1.3 Headset Operation)
Used to change the Toll Restriction (TRS) level of other extension
users temporarily. (® 4.1.5 Dial Tone Transfer)
Used to switch between CLIP and CLIR services. (® 3.1.16 CLIP
(Calling Line Identification Presentation), ® 13.1.23 Private
Network Features—QSIG—CLIP/COLP (Calling/Connected Line
Identification Presentation) and CNIP/CONP (Calling/Connected
Name Identification Presentation))
Used to switch between COLP and COLR services. (®
13.1.23 Private Network Features—QSIG—CLIP/COLP (Calling/
*1
Connected Line Identification Presentation) and CNIP/CONP
(Calling/Connected Name Identification Presentation))
Used to turn headset mode on/off while idle.
Used to switch between hands-free mode and headset modes
during a conversation. (® 8.1.3 Headset Operation)
Used to switch between Automatic Switching and Manual Switching
mode. (® 17.1.5 Time Service)
*1
Used to record a conversation into your own mailbox. (®
19.1.4 Voice Mail DPT (Digital) Integration)
Used to record a conversation into the mailbox of a specified
extension. (® 19.1.4 Voice Mail DPT (Digital) Integration)
Usage
Document Version 2013-05