Whisper Ohca; Virtual Locations - Panasonic KX-NCP500 Feature Manual

Virtual Locations

Instead of assigning all extensions to telephones, it is possible to store unused extensions (i.e., Service-out
mode) on a preinstalled extension card (i.e., settings are made but no physical location is utilized). When the
extension needs to be used, the extension can switch locations and service status with an extension on a
physical location (i.e., a location with a telephone).
[Example]
Extension settings can be switched allowing multiple extension users to use the same telephone as
follows:
Extn. 101
Service-in
Extn. 102
Service-out
Explanation:
The extension user of extension 101 changes to service out mode. The extension user of extension 102
switches extension settings and changes his extension to Service-in mode.
Conditions
•
This feature is not available for PSs, T1 OPX extensions, and SIP extensions.
•
An extension personal identification number (PIN) is required to use this feature. (® 5.1.6 Extension PIN
(Personal Identification Number))
PC Programming Manual References
4.9 [2-6-1] Numbering Plan—Main—Features—
Feature Manual References
20.1.2 Walking Extension
Operating Manual References
1.3.76 Walking Extension, Enhanced

20.1.4 Whisper OHCA

Description
An extension user can speak to a busy extension through the handset.
Document Version 2013-05
Extn. 101
Service-out
Service-out
Service-in
Virtual
Location
Extn. 102
Service-out
Service-out
Virtual
Location
Service-in
Walking Extension
20.1.4 Whisper OHCA
Virtual
Location
Extn. 101
Service-out
Service-in
Extn. 102
Service-in
Feature Manual 383