Panasonic KX-NCP500 Feature Manual page 304

15.1.2 Ring Tone Pattern Selection
4.15 [2-8-1] Ring Tone Patterns—Call from CO
•
Incoming Doorphone Calls: each pattern plan can assign a ring tone pattern for each doorphone.
4.16 [2-8-2] Ring Tone Patterns—Call from Doorphone
•
Others: each pattern plan can assign a ring tone pattern for incoming intercom calls as well as ring tones
assigned to certain features (e.g., timed reminder).
4.17 [2-8-3] Ring Tone Patterns—Call from Others
The ring tone patterns that arrive at an extension are determined by the pattern plan that is assigned to that
extension through system programming.
[Programming Example of Ring Tone Pattern Table]
Intercom
Table
Call/Hold
No.
Recall
1 Double
2 Single
: :
Conditions
•
"PT Ring Off Setting" can be enabled or disabled through system programming. If disabled, PT users
cannot turn incoming call ringing off for their extension.
•
For the S-CO, G-CO, L-CO, ICD Group, INTERCOM, PDN and SDN buttons, one of 30 ring tones can be
assigned through personal programming.
PC Programming Manual References
4.15 [2-8-1] Ring Tone Patterns—Call from CO—
4.16 [2-8-2] Ring Tone Patterns—Call from Doorphone—
4.17 [2-8-3] Ring Tone Patterns—Call from Others—
4.18 [2-9] System Options—Option 1—
6.1 [4-1-1] Wired Extension—Extension Settings
→Option 1— Ring Pattern Table
→Option 6— ICM Tone
6.5 [4-1-4] Wired Extension—Flexible Button—
CO, Single CO, Group CO, G-DN, SDN)
6.10 [4-2-1] Portable Station—Extension Settings—Option 1—
6.18 [4-3] DSS Console—
CO, G-DN, SDN)
Feature Manual References
21.1 Capacity of System Resources
Operating Manual References
3.1.4 Customizing the Buttons
304 Feature Manual
CO Line Call/ Doorphone
Hold Recall Call
TRG1 ... Port 1
Single Single
Double Double
: : :
PT Operation—PT Ring Off Setting
Optional Parameter (Ringing Tone Type Number) (for Loop
Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO, Group
Timed
Reminder
...
: :
Ring Tone Pattern Plan 1–8
Ring Tone Pattern Plan 1–8
Extension—Ring Tone Pattern Plan 1–8
Ring Pattern Table
Call External
LCS
Back Sensor
: : :
Document Version 2013-05