HP 5800 Series Configuration Manual page 111
Hide thumbs
Also See for 5800 Series:
- Command reference manual (396 pages) ,
- Quickspecs (53 pages) ,
- Configuration manual (294 pages)
Table of Contents
Advertisement
# Upload a configuration file config.cfg to the TFTP server.
<Sysname> tftp 1.2.1.1 put config.cfg configback.cfg
# Specify newest.bin as the main boot file to be used at the next startup for all member devices.
<Sysname> boot-loader file newest.bin slot all main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
The specified file will be used as the main boot file at the next reboot on slot 2!
# Reboot the IRF virtual device and the software is upgraded.
<Sysname> reboot
104
Hide quick links:
Advertisement
Table of Contents
