Ftp Client Configuration Example; Network Requirements - HP 5800 Series Configuration Manual

FTP client configuration example

Network requirements

As shown in
•
10.2.1.1/16 and 10.1.1.1/16 respectively. Device and PC are reachable to each other.
• Device downloads a boot file from PC for device upgrade, and uploads the configuration file to PC for
backup.
On PC, an FTP user account has been created for the FTP client, with the username being abc and the
•
password being pwd.
Figure 14 Network diagram for FTPing a boot file from an FTP server
Procedure
CAUTION:
• The boot file used for the next startup must be saved under the root directory of the storage medium.
Copy or move a file to the root directory of the storage medium. For more information about
boot-loader, see
If the available memory space of the device is not enough, use fixdisk to clear the memory or use delete
•
/unreserved
# Log in to the server through FTP.
<Sysname> ftp 10.1.1.1
Trying 10.1.1.1 ...
Connected to 10.1.1.1.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(10.1.1.1:(none)):abc
331 Give me your password, please
Password:
230 Logged in successfully
# Set the file transfer mode to binary to transmit boot file.
[ftp] binary
200 Type set to I.
# Download the boot file newest.bin from PC to the device.
Download the boot file newest.bin from PC to the root directory of the storage medium on the master.
•
[ftp] get newest.bin
Figure 14, use Device as an FTP client and PC as the FTP server. Their IP addresses are
Fundamentals Command Reference.
file url
- to delete the files not in use and then perform the following operations.
91