Configuring None Authentication For Console Login - HP 5800 Series Configuration Manual

The following table lists console port login configurations for different authentication modes:
Authenticat
ion mode
None
Password
Scheme
NOTE:
A newly configured authentication mode does not take effect unless you exit and enter the CLI again.

Configuring none authentication for console login

Prerequisites
You have logged in to the device.
By default, log in to the device through the console port without authentication and have user privilege level
3 after login. For information about logging in to the device with the default configuration, see
"Configuration
Configuration
Configure not to authenticate users.
Configure the device to authenticate users by using the
local password.
Set the local password.
Configure the authentication scheme.
Remote AAA
authentication
Select an
authentication
scheme.
Local
authentication
requirements."
Remarks
For more information, see
"Configuring none authentication for
console
For more information, see
"Configuring password
authentication for console
Configure
RADIUS/
HWTACACS
scheme.
Configure AAA
scheme used by
the domain.
Configure
For more information, see
username and
"Configuring scheme authentication
password on the
for console
AAA server.
Configure
authentication
username and
password.
Configure AAA
scheme used by
the domain as
local.
29
login."
login."
login."