Configuring the history buffer size
To configure the history buffer size:
Step
Enter system view
Enter user interface view
Set the maximum number of
commands that can be saved in the
history buffer
NOTE:
For more information about user-interface and history-command max-size, see "Logging in to the switch
commands."
Controlling the CLI display
Multi-screen display
Controlling multi-screen display
If the output information spans multiple screens, each screen pauses after it is displayed. Perform one of the
following operations to proceed.
Action
Press Space
Press Enter
Press Ctrl+C
Press <PageUp>
Press <PageDown>
By default, each screen displays up to 24 lines. To change the maximum number of lines displayed on the
next screen, use screen-length. For more information about screen-length, see "Logging in to the switch
commands."
Command
system-view
user-interface { first-num1
[ last-num1 ] | { aux | vty }
first-num2 [ last-num2 ] }
history-command max-size
size-value
Function
Displays the next screen.
Displays the next line.
Stops the display and the command execution.
Displays the previous page.
Displays the next page.
10
Remarks
—
—
Optional
By default, the history buffer can
save up to 10 commands.