By default, log in to the device through the console port without authentication and have user privilege level
3 after login. For information about logging in to the device with the default configuration, see
"Configuration
Procedure
To configure password authentication for console login:
Step
1.
Enter system view.
2.
Enter AUX user interface view.
3.
Configure the authentication
mode as local password
authentication.
4.
Set the local password.
5.
Configure common settings
for AUX user interface view.
When you log in to the device through the console port after the configuration, you are prompted to enter a
login password. A prompt such as <HP> appears after you enter the password and press Enter, as shown
in
Figure
8.
Figure 8 Configuration page
requirements."
Command
system-view
user-interface aux
first-number
[ last-number ]
authentication-mode
password
set authentication
password { cipher |
simple } password
—
Remarks
—
—
Required.
By default, log in to the device through the
console port without authentication and have
user privilege level 3 after login.
Required.
By default, no local password is set.
Optional.
See
"Configuring common settings for console
login
(optional)."
31