HP 5800 Series Configuration Manual page 66

Step
5. Enable command accounting.
6. Exit to system view
Enter the default
ISP domain view.
7. Configure
Apply the
the
specified AAA
authenticatio
scheme to the
n mode.
domain.
Return to system
view.
8. Create a local user and enter
local user view.
9. Set the authentication password
for the local user.
10. Specifies the command level of
the local user.
11. Specify the service type for the
local user.
12. Configuring common settings for
modem login.
Command Remarks
Optional.
•
•
command
accounting
•
quit —
domain Optional.
domain-name
By default, the AAA scheme is local.
authentication
If you specify the local AAA scheme, perform
default { hwtacacs-
the configuration concerning local user as well.
scheme hwtacacs-
If you specify an existing scheme by providing
scheme-name
the radius-scheme-name argument, perform the
[ local ] | local |
following configuration as well:
none | radius-
•
scheme radius-
scheme-name
[ local ] }
•
quit
Required.
local-user
user-name
By default, no local user exists.
password { cipher
| simple } Required.
password
Optional.
authorization-attri
bute level level
By default, the command level is 0.
Required.
service-type
terminal
By default, no service type is specified.
Optional.
—
See
login
59
By default, command accounting is
disabled. The accounting server does not
record the commands executed by users.
Command accounting allows the
HWTACACS server to record all executed
commands that are supported by the
device, regardless of the command
execution result. This helps control and
monitor user operations on the device. If
command accounting is enabled and
command authorization is not enabled,
every executed command is recorded on the
HWTACACS server. If both command
accounting and command authorization are
enabled, only the authorized and executed
commands are recorded on the
HWTACACS server.
Configure the AAA accounting server
before enabling command accounting.
For RADIUS and HWTACACS
configuration, see Security Configuration
Guide.
Configure the username and password on
the AAA server. (For more information, see
Security Configuration Guide.)
"Configuring common settings for modem
(optional)."