Configuring Scheme Authentication For Telnet Login - HP 5800 Series Configuration Manual

Figure 12 Configuration page

Configuring scheme authentication for Telnet login

Prerequisites
You have logged in to the device.
By default, log in to the device through the console port without authentication and have user privilege level
3 after login. For information about logging in to the device with the default configuration, see
"Configuration
Procedure
Step
1. Enter system view.
2. Enable Telnet.
3. Enter one or multiple
VTY user interface
views.
4. Specify scheme
authentication mode.
requirements."
Command
system-view
telnet server enable
user-interface vty
first-number
[ last-number ]
authentication-mod
e scheme
Remarks
—
Required.
By default, the Telnet service is disabled.
—
Required.
Whether local, RADIUS, or HWTACACS authentication is
adopted depends on the configured AAA scheme.
By default, local authentication is adopted.
41