HP 5800 Series Configuration Manual page 173

Task
Specify a command to be
executed at the specified time.
Specify a command to be
executed after the specified
delay.
Configuring a scheduled task—Approach 2
Step
1. Enter system view.
2. Create a scheduled task and
enter job view.
3. Specify the view in which the task
is executed.
4. Configure a command to be
executed at a specific time.
5. Configure a command to be
executed after a delay time.
Only one view can be specified for a task, which means all commands in the task are executed in the same
specified view. If different views are specified by executing view view-name repeatedly, only the last
configuration takes effect.
The view must be supported by the system and the view name must be complete instead of an abbreviation.
Most commonly used view names include: monitor (user view), system (system view), GigabitEthernetx/x/x
(Ethernet interface view), and Vlan-interfacex (VLAN interface view).
A scheduled task can contain up to 10 commands. If you want more than 10 commands to be executed,
configure them in different tasks.
A time-id uniquely identifies the binding between a command and its execution time. If two time-ids are the
same, the one configured later is effective.
Command Remarks
schedule job at time
Required
[ date ] view view
Use either command.
command
Available in user view.
•
schedule job delay
time view view
•
command
Command
system-view
job job-name
view view-name
time time-id at time date
command command
time time-id { one-off |
repeating } at time [ month-
date month-day | week-day
week-daylist ] command
command
time time-id { one-off |
repeating } delay time
command command
166
If you use schedule job at, changing the system
time will change the scheduled task execution
time.
If you use schedule job delay, changing the
system time will not change the scheduled task
execution time.
Remarks
—
Required.
Required.
Specify only one view for a task.
Required.
Use any of the commands.
•
If you use time at, changing the
system time will change the
scheduled task execution time.
•
If you use time delay, changing
the system time will not change
the scheduled task execution
time.