HP 5800 Series Configuration Manual page 46

Step
5. Configure the command level
for login users on the current
user interfaces.
6. Configure common settings
for VTY user interfaces.
When you log in to the device through Telnet again:
You enter the VTY user interface, as shown in
•
If "All user interfaces are used, please try later!" is displayed, it means the current login users exceed the
•
maximum number. Please try later.
Figure 11 Configuration page
Command
user privilege level level
—
Figure 1
39
Remarks
Required.
By default, the default command level is 0
for VTY user interfaces.
Optional.
See "Configuring common settings for VTY
user interfaces (optional)."
1.