Identifying Pluggable Transceivers; Diagnosing Pluggable Transceivers - HP 5800 Series Configuration Manual

Transceiver type
SFP+(Enhanced 8.5 and 10
Gigabit Small Form-factor
Pluggable)

Identifying pluggable transceivers

Pluggable transceivers might be of various types and from different vendors. Use the following commands to
view the key parameters of the pluggable transceivers, including transceiver type, connector type, central
wavelength of the laser sent, transfer distance and vendor name to identify the pluggable transceivers.
To identify pluggable transceivers:
Task
Display key parameters of the
pluggable transceivers.
Display the electrical label
information of the pluggable
transceivers.

Diagnosing pluggable transceivers

The system outputs alarm information for diagnosing and troubleshooting pluggable transceivers faults. The
digital diagnosis function monitors the key parameters of a transceiver, such as temperature, voltage, laser
bias current, TX power, and RX power. When these parameters are abnormal, take measures to prevent
transceiver faults.
To diagnose pluggable transceivers:
Task
Display the current alarm information of the pluggable transceivers.
Display the currently measured value of the digital diagnosis
parameters of the pluggable transceivers.
Application environment
Generally used for 10G Ethernet
interfaces
Command Remarks
display transceiver
interface [ interface-
type interface-
number ]
Electrical label information is also called permanent
display transceiver configuration data or archive information, which is
manuinfo interface written to the storage component of a transceiver
[ interface-type during debugging or testing. The information includes
interface-number ] transceiver name, device serial number, and vendor
name.
170
Whether can Whether can
be an optical be an electrical
transceiver transceiver
Yes Yes
Command
display transceiver alarm interface
[ interface-type interface-number ]
display transceiver diagnosis interface
[ interface-type interface-number ]