HP 5800 Series Configuration Manual page 69

Step
Define
shortcut key
for
terminating
tasks
Configure
flow control
mode
Configure
type of
terminal
display
Configure
user privilege
level for login
users
Set maximum
number of
lines on the
next screen
Set size of the
history
command
buffer
Set idle-
timeout timer
Command Remarks
Optional
escape-key { default |
character }
By default, press Ctrl+C to terminate a task.
flow-control
Optional
{ hardware | none |
By default, the value is none
software }
Optional
By default, the terminal display type is ANSI.
The device supports two types of terminal
display: ANSI and VT100. HP recommends
setting the display type of both the device
and the client to VT100. If the device and the
terminal type { ansi |
client use different display types (for
vt100 }
example, hyper terminal or Telnet terminal)
or both are set to ANSI, when the total
number of characters of the edited command
line exceeds 80, an anomaly such as cursor
corruption or abnormal display of the
terminal display may occur on the client.
Optional
user privilege level
level
3 by default.
Optional
screen-length
By default, the next screen displays 24 lines
screen-length at most.
A value of 0 disables the function.
Optional
history-command
By default, the buffer saves 10 history
max-size value
commands at most.
Optional
The default idle-timeout is 10 minutes. The
system automatically terminates the user's
idle-timeout minutes
connection if no information interaction
[ seconds ]
occurs between the device and the user
within the idle-timeout time.
Setting idle-timeout to 0 disables the timer.
62