HP 5800 Series Configuration Manual page 102

Procedure
CAUTION:
The boot file used for the next startup must be saved under the root directory of the storage medium (For
a device that has been partitioned, the boot file must be saved on the first partition). Copy or move a file
to the root directory of the storage medium. For more information about boot-loader, see
Command Reference.
Configure Device (FTP Server)
1.
# Create an FTP user account ftp, set its password to pwd and the user privilege level to level 3 (the
manage level). Allow user ftp to access the root directory of the flash, and specify ftp to use FTP.
<Sysname> system-view
[Sysname] local-user ftp
[Sysname-luser-ftp] password simple pwd
[Sysname-luser-ftp] authorization-attribute level 3
[Sysname-luser-ftp] authorization-attribute work-directory flash:/
[Sysname-luser-ftp] service-type ftp
[Sysname-luser-ftp] quit
# Enable FTP server.
[Sysname] ftp server enable
[Sysname] quit
# Check files on your device. Remove those redundant to ensure adequate space for the boot file to be
uploaded.
<Sysname> dir
Directory of flash:/
515712 KB total (2511 KB free)
<Sysname> delete /unreserved flash:/back.cfg
Configure the PC (FTP Client)
2.
# Log in to the FTP server through FTP.
c:\> ftp 1.1.1.1
Connected to 1.1.1.1.
220 FTP service ready.
User(1.1.1.1:(none)): ftp
331 Password required for ftp.
Password:
230 User logged in.
# Download the configuration file config.cfg of the device to the PC for backup.
ftp> get config.cfg back-config.cfg
# Upload the configuration file newest.bin to Device.
0 drw- -
1 drw- -
2 -rw- 1216
3 -rw- 1216
Dec 07 2005 10:00:57
Jan 02 2006 14:27:51
Jan 02 2006 14:28:59
Jan 02 2006 16:27:26
95
filename
logfile
config.cfg
back.cfg
Fundamentals