HP 5800 Series Configuration Manual page 104

Hide thumbs Also See for 5800 Series:
Table of Contents

Advertisement

Procedure
CAUTION:
If the available memory space of the master and subordinate switches is insufficient, use fixdisk to clear
the memory or use delete /unreserved
following operations.
The boot file used for the next startup must be saved under the root directory of the storage medium (For
a device that has been partitioned, the boot file must be saved on the first partition). Copy or move a file
to the root directory of the storage medium. For more information about boot-loader, see
Command Reference.
Configure the IRF virtual device (FTP Server)
1.
# Create an FTP user account ftp, set its password to pwd and the user privilege level to level 3 (the
manage level). Allow user ftp to access the root directory of the flash on the master, and specify ftp to
use FTP.
<Sysname> system-view
[Sysname] local-user ftp
[Sysname-luser-ftp] password simple pwd
[Sysname-luser-ftp] authorization-attribute level 3
[Sysname-luser-ftp] authorization-attribute work-directory flash:/
# To access the root directory of the storage medium of a subordinate switch (with the member ID 2),
replace flash:/ with slot2#flash:/ in authorization-attribute work-directory flash:/.
[Sysname-luser-ftp] service-type ftp
[Sysname-luser-ftp] quit
# Enable FTP server.
[Sysname] ftp server enable
[Sysname] quit
Configure the PC (FTP Client)
2.
# Log in to the FTP server through FTP.
c:\> ftp 1.1.1.1
Connected to 1.1.1.1.
220 FTP service ready.
User(1.1.1.1:(none)):ftp
331 Password required for ftp.
Password:
230 User logged in.
# Download the configuration file config.cfg of the IRF virtual device to the PC for backup.
ftp> get config.cfg back-config.cfg
# Upload the configuration file newest.bin to the root directory of the storage medium on the master.
ftp> put newest.bin
ftp> bye
Take the same steps to upgrade configuration file with FTP. When upgrading the configuration file with FTP,
put the new file under the root directory of the storage medium.
After you finish upgrading the Boot ROM program through FTP, you must run bootrom update to upgrade the
Boot ROM.
file
url
-
to delete the files not in use and then perform the
97
Fundamentals

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5820x seriesA5820x seriesA5800 series

Table of Contents