Table of Contents
Advertisement
A new window will pop-up, with all the source firmware files. All the settings for the FelixPrinter to work correctly are configured. Feel free to
browse around the files to get a better understanding of how it all works.
It is time to upload.
You are done with the firmware upload.
5.
Now it is time to install the software required to convert your CAD files to the G-code and control the printer.
Again go to the FelixPrinters website and do the following
a.
Download and install latest version of Python 2.x
i. After installing python make sure the python directory is on the windows path. If this is not the case the printer control
program will work partially.
ii.
Goto start menu - >right click on my computer and click properties
info@felixprinters.com
www.felixprinters.com
NOTE: Do not install version 3.x it doesn't work with pronterface and SFACT
Page 45 of 65
Advertisement
Table of Contents
