Module 6: Y-Axis (Time: 10-30 Min.) - FELIXrobotics Felix 1.0 Instruction Manual

9

Module 6: Y-axis (time: 10-30 min.)

Required tools for this module
- Allen key set.
BOM y-axis
Part description
y-stage bracket pt1_v5
y-stage bracket pt2_v4
y-stage bracket pt4_v3
Igus GmbH_NS-01-40 - rail
Igus GmbH_NW-02- cart
20x10_profile
t_slot_nut_5
Be sure you have the rail and slider combination with both "y-axis" on it.
Use the M4x16 bolts to mount the printed parts to the aluminum rail. Use
the selflocking M4 nuts and don't forget to place a medium washer at the
plastic part side.
info@felixprinters.com www.felixprinters.com

Amount
1
1
1
2
2
1
1
Mount the small y-stage bracket pt4_v3 onto the y-stage bracket pt2_v4.
Use a m4x25 bolt and a m4 nut. This small part is needed to tension the
belt later on.
Page 27 of 65