Table of Contents
Advertisement
1
Introduction
First of all thank you for your purchase of the Felix 1.0 printer. To get your Felix printer up and running as fast and painless as possible please follow this
manual. When things are unclear or if you have any remarks or tips, please contact us at info@felixprinters.com.
Depending on your skills this kit will take approximately 6-12 hours to assemble and to make your first print. Please read the manual carefully and follow
it step by step. Please don't make any shortcuts unless you know what you're doing. It's better to spend a few minutes extra on reading, than to wait a
week for new parts.
The manual is build up as follows: Each module starts with a short introduction. After that a Bill of Materials (BOM) is presented. The BOM doesn't
contain the small bolts and nuts, because for the assembly of the printer the assortment box of bolts and nuts is required. Further to not bloat the manual,
a picture of each part is only displayed in the complete BOM of the printer. This can be found in the Supplement of the document.
Before starting the build of your printer, it's recommended to check if all parts are present by comparing it with the bill of materials.
2
Required toolset
The following tools are minimally required to assemble and use the Felix printer
-
File
-
Wrenches 7mm and 13mm.
-
Tweezers. (included in kit)
-
Nippers.
-
Caliper.
-
Allen key set. IMPORTANT, the key set needs to have a round head,
which makes it able to work under an angle. Also longer keys are
recommended.
-
Pliers.
-
Drill with a variable speed. When plastic parts need to be drilled out, it
should be done with care.
-
Drills 2mm, 4mm
-
Level.
-
Hammer
-
Soldering iron including flux and soldering tin
3
Required skills
The following skills are required to put the Felix printer together:
-
Basic soldering skills
-
Skills to assemble a mechanical construction
-
Technical insight
-
Common sense
If you lack any of these skills or are unsure please get help from someone who can guide you or do this for you
info@felixprinters.com
www.felixprinters.com
Page 4 of 65
Advertisement
Table of Contents
