Event Notification - Fujitsu ETERNUS DX60 S3 Operating Instructions Manual

Chapter 3 Storage System Monitoring
3.4

Event Notification

3.4 Event Notification
By setting event notification, if an error (event) occurs in the ETERNUS DX, the event information is notified.
The methods that can be used to notify an event are "e-mail", "SNMP Trap", "Syslog", "remote support", and
"host sense".
For the procedure on setting event notification, refer to "Configuration Guide (Basic)".
■
E-mail
When an event occurs in the ETERNUS DX, an e-mail is sent to the specified e-mail address.
For more details on notified event information, refer to "Message List".
■
SNMP Trap
When an event occurs in the ETERNUS DX, an SNMP Trap is sent to the SNMP Manager (monitoring server).
For more details on event information notified by SNMP Trap, refer to "Message List".
■
Syslog
When an event occurs in the ETERNUS DX, the event log can be sent to the external server (Syslog server).
For the notified Syslog messages, refer to "Message List".
■
Remote Support
The information for errors that occur in the ETERNUS DX is notified to the remote support center.
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
42
P3AM-9012-01ENZ0