Fujitsu ETERNUS DX60 S3 Operating Instructions Manual page 54

Chapter 4 Component Expansion/Function Enhancement
4.2 Installing Additional Drive Enclosures
(2)
Select which DE-ID to connect the additional drive enclosure to and the type of drive enclosure
that is to be added in "Target Drive Enclosure", and then click the [Next>>] button.
• Type
Select the type of drive enclosure that is to be added.
-
A screen that shows which DE-ID the additional drive enclosure is to be connected to, the type of
drive enclosure that is to be added, and the procedure to add the drive enclosure is displayed.
3
Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.
4
Install the drive enclosure in the rack.
This step explains how to install drive enclosures that are used in regions other than EMEA&I.
3.5" 12DE
3.5" type drive enclosures
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
54
P3AM-9012-01ENZ0