Components (Front); Figure 1.15 Operation Panel (Drive Enclosure); Table 1.5 Status And Meanings Of Each Led (Operation Panel) - Fujitsu ETERNUS DX60 S3 Operating Instructions Manual

Chapter 1 Component Name/LED Name
1.2 3.5" Type Drive Enclosure
1.2.3

Components (Front)

This section describes the operation panel and the drives in the front of the drive enclosure.
■
Operation Panel
An operation panel has a DE-ID display and LEDs.
Figure 1.15 shows the operation panel.

Figure 1.15 Operation Panel (Drive Enclosure)

1
2
4
1. DE-ID
The DE-ID (drive enclosure number) of the drive enclosure is displayed.
2. IDENTIFY LED
3. FAULT LED
4. POWER LED
The LEDs turn on or blink to indicate the statuses that are listed below.

Table 1.5 Status and Meanings of Each LED (Operation Panel)

LED name
IDENTIFY
FAULT
POWER
Table 1.5
3
LED status
(blinks blue)
(amber)
(green)
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
shows the status and meanings of each LED.
Meanings
The installation location of the drive enclosure is identified ac-
cording to the instruction that is issued from ETERNUS Web GUI or
ETERNUS CLI.
The drive enclosure is in error status.
DC power is supplied to the drive enclosure.
24
P3AM-9012-01ENZ0