Husqvarna TE 250 - 310 2011 I.E. Workshop Manual page 84

1
2
4
5
3
GENERAL PROCEDURES
- Disconnect connectors (1) and (2) and MAQS connector (3) from the throttle
body (4).
- Loosen the clamps (5) and (6).
- Push the intake coupling (7) towards the rear end of the motorcycle to re-
7
lease the throttle body (4) and then extract it from the right-hand side of the
motorcycle.
6
H02228
H02227
- Place a vessel on the left-hand side of the cylinder, under the engine.
- Slacken the radiator cap (8).
8
H02229
E.22 Ed. 07-2010