Husqvarna TE 250 - 310 2011 I.E. Workshop Manual page 90

GENERAL PROCEDURES
- Remove the engine mounting bolts (41) using a 12 mm wrench on the left-
hand side and a 10 mm wrench on the right-hand side.
41
41
H02237
- Loosen the swinging arm axle nut (42) using a 22 mm wrench; pull out the
axle (43) from the right-hand side of the engine and pull the swinging arm
rearwards to facilitate engine removal.
- Lift the engine, tilt it to the left and remove it from the motorcycle.
- Place the engine on a rotating stand to perform the procedures described in
Sections F-G-H.
42
H02238
43
H02239
E.28 Ed. 07-2010