Husqvarna TE 250 - 310 2011 I.E. Workshop Manual page 123

Ed. 07-2010
ENGINE DISASSEMBLY
- To facilitate assembly, mark the position of the gear shift pedal (1) on the shaft.
Remove the retaining screw (2) of the gear shift pedal (1) (8 mm wrench)
and slide the pedal from the selector shaft.
- Remove the selector shaft (3) from the right-hand side.
- Remove the two screws (4) (4 mm Allen wrench and 8 mm wrench) secur-
ing the selector retaining plate (5) and remove retaining plate and ratchet
mechanism (6).
F.31