Husqvarna TE 250 - 310 2011 I.E. Workshop Manual page 219

Ed. 07-2010
FRONT SUSPENSION
Fit the dust seal to the outer tube.
TC - TXCi
Make sure that there is not play between dust seal and outer tube.
H02277
TC - TXCi
Refit the cartridge.
Tighten the nut all the way onto the rebound adjuster rod.
Make sure rebound adjuster rod thread length is at least 15 mm (0.6 in.).
H02278
TC - TXCi
Fill the cartridge with the specified oil.
H02279
TC - TXCi
Pump the piston rod up and down repeatedly to remove any air from the cyl-
inder.
H02280
I.13