Saddle Removal; Side Panel Removal; Battery Removal (Te - Tcxi) - Husqvarna TE 250 - 310 2011 I.E. Workshop Manual

1
2
3
H02201
GENERAL PROCEDURES

Saddle removal

- Turn the rear fixing (1) counter clockwise and remove the saddle.

Side panel removal

- Remove the saddle as described in the relevant paragraph.
- Loosen the retaining screws (1) and remove the side panels (2) and (3).

Battery removal (TE - TCXi)

- Remove the saddle as described in the relevant paragraph.
- First remove the BLACK negative cable (8 mm Allen wrench), then the RED
positive cable (when reassembling, first connect the RED positive cable, then
the BLACK negative cable); remove the battery (1) from its housing.
E.4 Ed. 07-2010