Clutch Plate Replacement - Husqvarna TE 250 - 310 2011 I.E. Workshop Manual

Ed. 07-2010
SETTINGS AND ADJUSTMENTS

Clutch plate replacement

This procedure can be performed with the motorcycle leaning to the left - there
is no need to drain engine oil.
- Remove the brake pedal (1).
- Remove the six retaining screws (2) and the clutch cover (3).
- Using an 8 mm wrench, unscrew the six screws (4) securing the clutch springs.
Remove springs, pressure plate (5) with bearing (6) and clutch actuator plate
(7).
D.9