Husqvarna TE 250 - 310 2011 I.E. Workshop Manual page 168

ENGINE REASSEMBLY
Output shaft (5 SPEED)
Fit the roller cage (1).
Fit 2nd gear (2), washer (3) and retaining ring (4).
Fit 4th gear (5) and retaining ring (6).
Fit the washer (7).
Fit roller cage (8) and 3rd gear (9).
Fit washer (10) and retaining ring (11).
Apply "MOLYKOTE G-n plus" on the 3rd gear (9).
Fit 5th gear (13) and washer (14).
Fit roller cage (15), 1st gear (16) and washer (12).
A: with 1st gear engaged
B: with 3rd gear engaged
C: with 2nd gear engaged
D: lubricate with MOLYKOTE G-n plus
H.18 Ed. 07-2010