Husqvarna TE 250 - 310 2011 I.E. Workshop Manual page 87

22
23
24
25
27
28
Ed. 07-2010
GENERAL PROCEDURES
- Loosen the three screws (22) and remove the clutch actuator (23).
H02231
- Remove the clip (24) that holds clutch hose and wiring harness together.
H02232
- Disconnect connectors (25) and (26) that connect generator and gear sensor
connector (27).
26
H02233
- Remove the water temperature sensor connector (27).
TE-TXCi
- Remove the ground cables (28) (TE-TXCi).
29
H02346
E.25