Oil Pump Disassembly; Gear Shift Pedal And Selector Assembly Removal - Husqvarna TE 250 - 310 2011 I.E. Workshop Manual

ENGINE DISASSEMBLY

Oil pump disassembly

- Loosen the screws (1) using a 4 mm Allen wrench and remove pump body
(2) and gasket.
- Remove the pump rotors (3) and (4) and extract the drive pin (5) to release
the gear (6).
- Remove drive gear (7) and oil suction stub (8).
Make sure to align the rotor dots (9) on assembly.

Gear shift pedal and selector assembly removal

F.30 Ed. 07-2010