Husqvarna TE 250 - 310 2011 I.E. Workshop Manual page 217

TC - TXCi
Ed. 07-2010
FRONT SUSPENSION
Remove the sealing rings and the metal rings mounted on the inner tube.
TC - TXCi
Do not reuse any metal parts after removal.
Replace them with new components.
Replace damaged sealing rings.
Washer and retaining ring may be reused if they are not damaged.
H02268
Check the rebound adjuster rod for distortion or damage.
TC - TXCi
Replace as required.
H02269
Check the rebound adjuster.
TC - TXCi
Replace damaged O-rings.
Replace the complete assembly (do not reuse it).
H02270
Check the spring.
TC - TXCi
Replace it if:
outside diameter is damaged or exceedingly worn.
Free length is 449 mm (17.7 in.) or less.
H02271
Check the inner tube.
Replace if distorted.
(Never attempt to repair or reuse a distorted fork tube).
If the tube shows surface defects, sand the surface.
If repair is not possible, replace the tube.
H02272
(Never reuse an inner tube if scored or showing bulges on the outer surface).
TC - TXCi
Check the outer tube.
Replace the tube is any distortion is detected or if the sliding surface is dam-
aged.
H02273
I.11