Solenoid Starter Removal (Te - Txci); Battery-Less (Tc) - Husqvarna TE 250 - 310 2011 I.E. Workshop Manual

2
1
GENERAL PROCEDURES
Solenoid starter removal (TE – TXCi)
- Remove saddle and left-hand side panel (in this order) as outlined in the
relevant paragraphs.
- Disconnect the negative and positive cables of the battery.
- Disconnect the starter motor positive cable (1) from the solenoid starter.
- Disconnect the connector (2) and remove the solenoid starter (3) from its
mount.

Battery-Less (TC)

- Remove the left body panel as described in the relevant paragraph.
- Disconnect the connector (1).
- Remove the condenser (2) with the relevant rubber support.
H02217
E.16 Ed. 07-2010