Solaris OS Issues and Workarounds
This section contains information about Solaris OS issues.
TABLE 3-4
you are using.
Solaris Issues for All Supported Releases
TABLE 3-2
Solaris OS.
Solaris OS Issues and Workarounds for All Supported Releases (1 of 3)
TABLE 3-2
CR ID
Description
6531036
The error 'message network
initialization failed' appears
repeatedly after a boot net installation.
6532215
volfs or dscp services might fail when a
domain is booted.
6572827
The prtdiag -v command reports PCI bus
types incorrectly. It reports "PCI" for PCI-X
leaf devices and "UNKN" for legacy PCI
devices.
list issues you might encounter, depending upon which Solaris OS release
lists Solaris OS issues that you might encounter in any supported release of
TABLE 3-2
Workaround
No workaround is available. This message can
be safely ignored.
Restart the service. To avoid the problem, issue
the following commands.
# svccfg -s dscp setprop
start/timeout_seconds=count: 300
# svccfg -s volfs setprop
start/timeout_seconds=count: 300
# svcadm refresh dscp
# svcadm refresh volfs
No workaround is available.
Chapter 3
Information About Software
,
, and
TABLE 3-3
17
Need help?
Do you have a question about the SPARC Enterprise M3000 and is the answer not in the manual?