Solaris Os Issues And Workarounds; Solaris Issues For All Supported Releases - Sun Microsystems SPARC Enterprise M8000 Product Notes

Xcp version 1091
Hide thumbs Also See for SPARC Enterprise M8000:
Table of Contents

Advertisement

Solaris OS Issues and Workarounds

This section contains information about Solaris OS issues. The following tables list
issues you might encounter, depending upon which Solaris OS release you are using.

Solaris Issues for All Supported Releases

TABLE 3-2
your domains are not running the latest Solaris release, also take notice of CRs fixed
in releases later than yours, as noted in the tables that follow.
Solaris OS Issues and Workarounds for All Supported Releases (1 of 4)
TABLE 3-2
CR ID
Description
4816837
System hangs when executing parallel hot-
plug operation with SP DR in suspend phase.
6459540
The DAT72 internal tape drive connected to
M4000/M5000/M8000/M9000 servers might
time out during tape operations.
The device might also be identified by the
system as a QIC drive.
6522017
Domains using the ZFS file system cannot use
DR.
6531036
The error message network
initialization failed appears
repeatedly after a boot net installation.
lists Solaris OS issues that you might encounter in any Solaris release. If
Workaround
There is no workaround.
Add the following definition to
/kernel/drv/st.conf:
tape-config-list=
"SEAGATE DAT
DAT72-000",
"SEAGATE_DAT____DAT72-000",
"SEAGATE_DAT____DAT72-000";
SEAGATE_DAT____DAT72-000=
1,0x34,0,0x9639,4,0x00,0x8c,0x8c,
0x8c,3;
There are four spaces between SEAGATE DAT
and DAT72-000.
Set the maximum size of the ZFS ARC lower.
For detailed assistance, contact your authorized
service representative.
There is no workaround.
Chapter 3
Information About Software
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sparc enterprise m9000

Table of Contents