Solaris Os Issues And Workarounds; Solaris Issues For All Supported Releases - Sun Microsystems SPARC Enterprise M8000 Product Notes

Hide thumbs Also See for SPARC Enterprise M8000:
Table of Contents

Advertisement

XCP Issues and Workarounds (2 of 2)
TABLE 4
ID
Description
6675409
If COD licensed capacity is changed while a
COD board is undergoing DR, some of the
COD CPUs might be marked as Faulted.
This will require a service action to correct.
6679286
When you use the command setsnmpusm
passwd to set a password, if you set a
password of fewer than eight characters, a
segmentation fault occurs.

Solaris OS Issues and Workarounds

This section contains information about Solaris OS issues.
TABLE 7
you are using.

Solaris Issues for All Supported Releases

TABLE 5
Solaris OS.
10
SPARC Enterprise M8000/M9000 Servers Product Notes for XCP 1071 • July 2008
list issues you might encounter, depending upon which Solaris OS release
lists Solaris OS issues that you might encounter in any supported release of
Workaround
Do not attempt to modify the COD licensed
capacity while a DR operation is in progress
on a COD board.
COD licensed capacity is modified by adding
or removing licenses (with the
addcodlicense or deletecodlicense
commands) or by changing headroom (with
the setcod command). Do not use these
commands (or equivalent browser operations)
while a DR operation is in progress. You can
change the COD licensed capacity after the DR
operation is completed.
Always set a password of at least eight
characters.
TABLE 5
,
, and
TABLE 6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sparc enterprise m9000

Table of Contents