Panasonic KX-TDA100 Programming Manual page 292

3.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Start Signal Type
Selects the type of the start signal.
Value Range
Immediate: Sends the dialled digits to the trunk when the First Dial Timer expires.
Wink: Sends the dialled digits to the trunk when the wink signal is received.
Maintenance Console Location
3.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
None
E&M TIE Line Type
Selects the type of the voice path for an E & M line.
Value Range
2 wires, 4 wires
Maintenance Console Location
3.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
None
Sending Caller ID to TIE
Specifies whether Caller ID information is sent when
Value Range
No, Yes
Maintenance Console Location
3.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
292 PC Programming Manual
Trunk Property on this screen is set to Private.