3.29 [1-1] Slot—Port Property - EM Port—Connection Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
3.29 [1-1] Slot—Port Property - EM Port—Connection
Command (KX-TDA100/KX-TDA200/KX-TDA600
only)
Commands for the E & M channels can be programmed.
INS
Puts the channel in service.
Value Range
Not applicable.
Maintenance Console Location
3.29 [1-1] Slot—Port Property - EM Port—Connection Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
3.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Guide References
None
OUS
Takes the channel out of service. This enables a temporary non-use of the channel, for example, for the
purpose of repair.
Value Range
Not applicable.
Maintenance Console Location
3.29 [1-1] Slot—Port Property - EM Port—Connection Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
3.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Guide References
None
296
PC Programming Manual