Panasonic KX-TDA100 Programming Manual page 598

6.1 [4-1-1] Wired Extension—Extension Settings
Value Range
Slot number
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
3.1 [1-1] Slot
Feature Guide References
None
Port
Indicates the port number (reference only).
Value Range
Port number
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
3.5 [1-1] Slot—Port Property - Extension Port
Feature Guide References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.
Type the new extension number, then click Apply.
2.
Set the status of the extension port to "OUS", then "INS".
When changing the extension number, make sure that the extension port is not in use. If the extension number
is changed while the port is in use, the new extension number will not come into effect.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
598 PC Programming Manual