Panasonic KX-TDA100 Programming Manual page 324

3.38 [1-1] Slot—Port Property - IP-Extension Port
Port
Indicates the port number (reference only).
Value Range
Port number
Maintenance Console Location
3.38 [1-1] Slot—Port Property - IP-Extension Port
Programming Manual References
None
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
Extension Number
Specifies the extension number of the port.
To change the extension number of an extension, follow the steps below:
1.
Type the new extension number, then click Apply.
2.
Set the status of the extension port to "OUS", then "INS".
When changing the extension number, make sure that the extension port is not in use. If the extension number
is changed while the port is in use, the new extension number will not come into effect.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
3.38 [1-1] Slot—Port Property - IP-Extension Port
Programming Manual References
None
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
This cell is only active when
324 PC Programming Manual
Status on this screen shows Registered.