Panasonic KX-TDA100 Programming Manual page 879

•
3.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
–
Dialling Mode
–
DTMF Width
–
CO Pulse Speed
•
3.31 [1-1] Slot—Port Property - DID Port
–
Dialling Mode
–
DTMF Width
–
CO Pulse Speed
Feature Guide References
1.5.4.4 Dial Type Selection
Direct In Line (DIL)
•
12.2 [10-2] DIL Table & Port Settings—DIL
–
DIL Destination—Day, Lunch, Break, Night
–
Tenant Number
–
VM Trunk Group No.
Feature Guide References
1.1.1.2 Direct In Line (DIL)
Direct Inward Dialling (DID)/Direct Dialling In (DDI)
•
3.30 [1-1] Slot—Card Property - DID type
•
4.4 [2-3] Timers & Counters—Miscellaneous—
•
12.2 [10-2] DIL Table & Port Settings—DDI / DID / TIE / MSN
–
Distribution Method
–
DDI/DID/TIE/MSN—Remove Digit
–
DDI/DID/TIE/MSN—Additional Dial
•
12.3 [10-3] DDI / DID Table
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Direct Inward System Access (DISA)
•
4.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf
–
DISA—Delayed Answer Timer
–
DISA—Mute & OGM Start Timer after answering
–
DISA—No Dial Intercept Timer
–
DISA—2nd Dial Timer for AA
–
DISA—Intercept Timer—Day, Lunch, Break, Night
–
DISA—Disconnect Timer after Intercept
–
DISA—CO-to-CO Call Prolong Counter
–
DISA—CO-to-CO Call Prolong Time
–
DISA—Progress Tone Continuation Time before Recording Message
14.2 Feature Programming References
Incoming Call Inter-digit Timer—DDI / DID
PC Programming Manual 879