9-4] Ndss Key Table - Panasonic KX-TDA100 Programming Manual

11.4 [9-4] NDSS Key Table

Extensions at up to 7 other PBXs that will be monitored using Network Direct Station Selection (NDSS) can
be registered. A maximum of 250 extensions can be registered. To create an NDSS button to monitor an
extension, the extension must be registered here first.
To clear NDSS link data, click the NDSS Clear button.
Note that the parameters on this screen can only be set when the
Centralised Operator Feature—Network PBX ID is set to 1 in the 11.2 [9-2] Network Data Transmission
screen.
Network Extension No.
Specifies the number of the remote extension (attached to another PBX) that will be monitored. The number
input here can use either Extension Number Method or PBX Code Method.
Value Range
Max. 16 digits (consisting of 0–9, *, and #])
Maintenance Console Location
11.4 [9-4] NDSS Key Table
Programming Manual References
None
Feature Guide References
1.30 Networking Features—1.30.1 TIE Line Service
1.30.5.1 Network Direct Station Selection (NDSS)
Network Extension Name for Programming Reference
Specifies the name of the network extension. This name is only shown here, not on the displays of extensions.
Value Range
Max. 20 characters
Maintenance Console Location
11.4 [9-4] NDSS Key Table
Programming Manual References
None
Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)
11.4 [9-4] NDSS Key Table
Network Data Transmission for
PC Programming Manual 805