Panasonic KX-TDA100 Programming Manual page 58

2.5.9 Tool—Import
Quick Dial (Basic)
Data Type
No.
Dial
Phone Number
Related programming: 4.9 [2-6-2] Numbering Plan—Quick Dial
Quick Dial (MEC)
Data Type
No.
Dial
Phone Number
Related programming: 4.9 [2-6-2] Numbering Plan—Quick Dial
To import system data
1.
From the Tool menu, point to Import, and then click the type of data to import.
2.
Navigate to the folder containing the system data file you want to open.
3.
Select the file.
4.
Click Open to open the file.
If applicable, a list of field names found in the imported file will be displayed.
5.
For the Feature - Speed Dial and Caller ID table, when an EMEC (KX-TDA600) or MEC (KX-TDA30/
KX-TDA100/KX-TDA200) card is installed, select the Speed Dial table to which to import the data
(KX-TDA30: Basic Memory or Expanded Memory; KX-TDA100/KX-TDA200/KX-TDA600: system or
tenant) from the drop-down list.
6.
If required, select import fields.
When import fields can be selected, the selection screen is displayed automatically. Matching origin and
destination fields are entered by default.
•
To change the destination for an import field, select the preferred field from the drop-down list.
•
To not import a field, select the blank option from the drop-down list.
7.
Click OK to perform the import operation.
Depending on the type of data imported, the relevant programming screen may be displayed.
•
Click OK or Apply to complete the import operation.
If data in a field being imported does not match the required format for the import destination, an error
message will be displayed when the import operation is attempted, and the operation will be cancelled.
This can occur when, for example, the destination field can only accept numeric data, but the data being
imported contains alphabet characters, as the correct fields were not linked together.
58 PC Programming Manual
Import Destination
Location
Dial
Phone Number
Import Destination
Location
Dial
Phone Number