14.2 Feature Programming References
Call Forwarding (CF)—by ISDN (P-MP)
•
4.8 [2-6-1] Numbering Plan—Main—Features—
•
4.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—
Feature Guide References
1.21.1.4 Call Forwarding (CF)—by ISDN (P-MP)
Call Forwarding (CF)—by ISDN (P-P)
•
3.14 [1-1] Slot—Port Property - BRI Port—Supplementary Service—
CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, 3PTY
•
3.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Supplementary
Service—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D,
AOC-E, 3PTY
•
4.8 [2-6-1] Numbering Plan—Main—Features—
•
4.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—
Feature Guide References
1.21.1.5 Call Forwarding (CF)—by ISDN (P-P)
Call Forwarding (CF)—by QSIG
•
3.14 [1-1] Slot—Port Property - BRI Port—Supplementary Service—
CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, 3PTY
•
3.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Supplementary
Service—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D,
AOC-E, 3PTY
Feature Guide References
1.30.4.3 Call Forwarding (CF)—by QSIG
Call Hold
•
4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
–
Recall—Hold Recall
–
Recall—Disconnect after Recall
•
4.8 [2-6-1] Numbering Plan—Main—Features
–
Call Hold / Call Hold Retrieve
–
Call Hold Retrieve : Specified with a Holding Extension Number
–
Hold Retrieve : Specified with a Held CO Line Number
•
4.17 [2-9] System Options
–
Option 1—
–
Option 1—
–
Option 5—
870
PC Programming Manual
PT Operation—Automatic Hold by ICM / CO / ICD Group key
PT Operation—Hold Key Mode
SLT—SLT Hold Mode
ISDN-FWD (MSN) Set / Cancel / Confirm
CF (MSN)
COLP, CLIR, COLR, CNIP,
ISDN-FWD (MSN) Set / Cancel / Confirm
CF (MSN)
COLP, CLIR, COLR, CNIP,